Adam Childs YouTube

A film in a surprisingly dry Wales testing the Ktech Yamaha Tenere XTZ700 project bike suspension against a stock suspension bike on road with Adam ‘Chad’ Child ex MCN and TT rider, and off Road with Mick Extance, a veteran of the world’s toughest endurance race ‘The Dakar Rally’

https://youtu.be/_kB6psx34zM

FRONT FORK CARTRIDGES ORDS YAMAHA XTZ700 TENERE 2019
Part # 120-019-270-015

Designed and manufactured in the UK. The replacement Damping System for the Yamaha XTZ700 Tenere has been developed for adventure motorcycles. Using the highest quality materials, the system provides the rider with control and confidence in road and off-road conditions. The replacement damping features spring preload, compression and rebound damping adjustment, and a hydraulic bottoming control system that protects the rider from severe impacts in off-road conditions.

FRONT FORK ORVS YAMAHA TENERE 700

Part # 118-200-020-016

K-Tech ORVS are available to fit most front fork cartridge damping systems and have been designed for road and Off Road use to give enhanced damping control over the original equipment, giving comfort and confidence to the rider. All piston kits are supplied as a complete assembly for ease of fitment with new control valves and needles to give a more precise range of adjustment.

Designed and manufactured in the UK
Tighter tolerance for improved performance over original equipment parts
Improved adjustment range
Complete assemblies for ease of fitment
Increase comfort and confidence

The ORVS Piston kits are only available through K-Tech authorised dealers who have been trained to install these products as there are specialist tools and techniques required to guarantee performance and safety of this product.

FRONT FORK SPRING 6.0N -(MIN ORDER QTY 2) YAMAHA TENERE 700
Part # 38-425-60/69

K-Tech fork springs are manufactured from the highest-grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set, and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade 1.

Cold coiled
Heat treated
Tempered
Shot peened
Ground ends
Polished for reduced friction and smoother performance

Part number etched

SHOCK ABSORBER SPRING -75N (55X245) BLACK YAMAHA TENERE 700
Part # 55-245-75/95

K-Tech shock springs are manufactured from the highest-grade Chrome Silicone wire, each spring is cold coiled, heat-treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.

Cold coiled
Heat treated
Tempered
Shot Peened
Ground ends
Zinc phosphate coated
Epoxy powder coated

Part numbered

SHOCK ABSORBER SEAL HEAD SERVICE KIT - KYB 40/14 OFF ROAD
Part # 205-200-015

K-Tech shock absorber service kits are supplied with an oil seal, dust seal, piston rod bush and most O-Rings needed to service a shock absorber. All of the service parts are either equal or exceed the quality of the original parts. Most service kits are supplied with a new piston rod lock nut for added security when rebuilding the shock absorber.

SHOCK ABSORBER PISTON ASSEMBLY WITH SHIMS 40X12MM ADVENTURE
Part # 211-300-050

The K-Tech shock absorber piston upgrades are supplied with the piston bush, piston rod lock and shims to enhance the damping performance of the original shock. These products have been tested in laboratory conditions and in the field to ensure their performance before being released.

FRONT FORK DUST SEALS (PAIR) 43MM KYB

Part # DSS-017

K-Tech front fork dust seals are manufactured by NOK and are a direct replacement for the original equipment parts. NOK are chosen as original equipment by all Japanese suspension manufacturers for their quality and durability. All dust seals are supplied in pairs and available for most fitments.

FRONT FORK GUIDE BUSH (PAIR) - 43X12X2.50
Part # GBS-015

K-Tech front fork guide bushes are a direct replacement and manufactured to the exact standards of the original equipment parts. They are manufactured from hardened steel and coated with copper for added protection. The contact surfaces are a PTFE material designed to give low friction on the moving parts. All guide bushes are supplied in pairs and available for most fitments.

FRONT FORK OIL SEALS (PAIR) 43MM KYB

Part # FSS-017

K-Tech front fork oil seals are manufactured by NOK and are a direct replacement for the original equipment parts. NOK are chosen as original equipment by all Japanese suspension manufacturers for their quality and durability. All oil seals are supplied in pairs and available for most fitments.

FRONT FORK SLIDE BUSH -PAIR (43.70X20X1.00)

Part # SBS-017

K-Tech front fork slide bushes are a direct replacement and manufactured to the exact standards of the original equipment parts. They are manufactured from hardened steel and coated with copper for added protection. The contact surfaces are a PTFE material designed to give low friction on the moving parts. All guide bushes are supplied in pairs and available for most fitments.

Yamaha Tenere XTZ700 Suspension Upgrades